With the help of vibro hammer a steel pipe is advanced into the ground with the bottom of it being left in the ground. After the pipe reaches the required depth, a reinforcement cage is lowered into the pipe which is filled with concrete, afterwards using the vibro hammer the...
Sorry, this entry is only available in Lithuanian.
(LT)
Siūlome aukštos kokybės CFA grąžtus bei su jais susijusią įrangą.
CFA grąžtai komplektuojami nuo 2 metrų iki 24 metro ilgio su ne mažesne nei nei 100 mm diametro vidine ertme.
Siūlome CFA galvas kietam ir minkštam gruntui , minkštai uolienai, gręžimo karūnas, apsauginius vamzdžius gręžimui, bei jungtis CFA grąžtams.
CFA gręžimo skersmuo, mm |
100 |
200 |
300 |
400 |
500 |
600 |
700 |
800 |
L |
1÷4 |
1÷4 |
1÷4 |
1÷4 |
1÷4 |
1÷4 |
1÷4 |
1÷4 |
P |
90 |
160 |
240 |
300 |
380 |
500 |
500 |
600 |
Skersmuo, R |
51 |
70 |
89 |
127 |
139 |
139 |
159 |
159 |
G |
6 |
6 |
8 |
12 |
16 |
16 |
16 |
16 |
S |
36 |
46 |
51 /85 |
85 |
85/130 |
130/160 |
160 |
160 |
Betono išeigos skersmuo |
– |
– |
– |
60 |
60/100 |
100 |
125 |
125 |
Visi išmatavimai pateikti milimetrais.
To install these piles few different methods are applied. Our company uses KELLY and CFA methods for the drilling piles installation. KELLY METHOD Using this method for the piles installation the drilling machines are used, in which the so-called KELLY equipment is mounted, consisting of a Kelly bar and a...
Piling walls are installed out of steel or plastic planks, when the installation of the temporary or permanent wall is needed, for example, in order to protect the site from the ground water, landslides, etc. For the installation of the piling walls vibro hammers are used, which are mounted on...
Anchors are installed in order to keep the bearing walls stable, in case the ground pressure exceeds the allowed loading of the bearing walls. Anchors are normally installed by the drilling of a steel anchor (a bar or a pipe) through the bearing wall at an angle and at a...